What is the back button on the ps3 controller?
Q. In my NBA 2k10 manual, it says press the BACK button for one of the moves. I see no BACK button, so what is it?
Asked by Nash - Fri Dec 25 20:19:52 2009 - PlayStation - 2 Answers - Comments

A. Try using the O (circle) button, it has the "back" function on most games and even on PS menus...
Answered by Iran Rodrigues - Fri Dec 25 20:34:54 2009

How to add a new button to firefox navigation toolbar?
Q. Okay here are the details. I want to add a new button to firefox, the purpose of that button is that when i type something in the address bar in firefox and click that button in navigation toolbar, that must serve the purpose of "I am feeling lucky button on google homepage". Any super genius here?
Asked by Master Wayne - Thu Jul 21 04:06:38 2011 - Programming & Design - 1 Answers - Comments

A. How To Create And Add Button In Firefox Navigation Toolbar [Guide]: Custom toolbar button: https://developer.mozilla.org/En/Custom_Toolbar_Button Ron
Answered by Your Shadow - Thu Jul 21 06:51:35 2011

Where is the fuel pump reset button located on a 1994 Ford Thunderbird?
Q. I have a '94 Ford Thunderbird and key remote seems to set off the alarm occasionally and the car won't start. It was suggested that I press the fuel reset button which should be located in the trunk on the left side. I notice an apparatus there but there does not appear to be a (red) button to depress. Is there a reset button on this type of car?
Asked by aprilreign - Thu Jan 3 10:02:56 2008 - Maintenance & Repairs - 3 Answers - Comments

A. The fuel cut-off switch is an inertia switch. The only way it would need to be reset is if the car was hit hard enough to trip it. Your problem would more than likely be with your anti-theft system.
Answered by knave68 - Thu Jan 3 12:10:54 2008

How can I temporarily fix the button on my jeans?
Q. The button just completely popped off my jeans, and I need a quick way to keep my jeans buttoned until I have time to get the real button fixed. Any suggestions?
Asked by Gina P - Fri Mar 27 17:55:46 2009 - Fashion & Accessories - 3 Answers - Comments

A. Cut a hair elestic and wrap it through the loop. Tie it in a knot on the inside of your jeans, Otherwise, a belt will hide the missing button, and will hopefully stop your trews from falling down !
Answered by Lo - Fri Mar 27 18:07:36 2009

how do i stitch a button back onto my trousers?
Q. the button popped off my school trousers and i need to put it back (obviously!!haah)_ i know the ins and outs, needle, thread, bottom trousers put it all together! but there button has 4 holes, is there any pattern i should follow with the holes? and my biggest question is when i am finished stitching it back on, how do i stop it from unraveling, how do i tie up the end bit of thread?
Asked by Vive l' Eire!!! - Wed Nov 7 11:42:40 2007 - Other - Home & Garden - 3 Answers - 1 Comments

A. well i always double thread then tie a knot in the end push needle on inside of trousers through to outside then go in and out of button in a cross quite a lot of times about 6 or 7 then push through to inside of trousers do a few stitches just to doubly secure then snip of with scissors ... :)
Answered by casha1 - Wed Nov 7 14:26:12 2007

What would cause a belly button to go from an innie to an outtie?
Q. Hi I know an older(way past menopause) woman who had an innie belly button but it is turning into an outtie belly button. Can being over weight cause this problem? Should this be looked at by a doctor?
Asked by pargon8 - Sun Mar 29 16:49:39 2009 - Women's Health - 15 Answers - Comments

A. an outie is caused by a hernia, I suspect her doctor already knows about it, if it isn't giving her any pain, then I doubt a doctor will do anything about it.
Answered by essentiallysolo - Sun Mar 29 16:53:27 2009

How to make a button with multiple lines of text in Visual Studio?
Q. I'm trying to create a clickable area that has multiple lines of text. A button would be perfect, but apparently the button only displays the first line of its Text field. Are there any other options? I tried putting labels on top of the button, but when you click a label the button is not pressed. I tried to put the button on top of the labels and make it transparent, but the labels don't show through. This is for a smart device application (windows mobile 6).
Asked by zak_track - Sun Apr 18 14:29:04 2010 - Programming & Design - 3 Answers - Comments

A. If a web app, use a link with a in it and change the style of the link to suit your design. You can also use a read-only multi-line textbox and again change the style to suit your needs, and adding a on Click event handler.
Answered by Shannon - Sun Apr 18 14:35:52 2010

How do you sew a button back on a couch?
Q. I've got this modern looking 9ft. couch. My fiancee and I joke that it has "death buttons" because we easily get snagged on the buttons. One came loose and I'm not sure how to resew it since the button has the stich hidden under the fabric. Any ideas? Thanks so much in advance for your answers! I forgot to mention that the buttons extend the entire length of the couch and there's at least 36 of them on the base cushion! All great ideas though, thanks so much!
Asked by sktchgrl - Sun Feb 18 18:25:30 2007 - Decorating & Remodeling - 3 Answers - Comments

A. Oh, I know that one, my puppies decided to pull all the buttons off the new couch. The upholsterer told me to remove the back material of the couch and retie all of the buttons-because if one is loose the rest will follow. So ..remove the back from the bottom up,you don't need to remove the entire back leave the top edge alone, then it will be easier to tack back down once you're done.Take the button from the front and place the shank through the small hole where it was. Use a sturdy piece of twine in a large needle and sew through the shank--make a loop and then pull tight and knot it three of four times. While the back is off make sure all the buttons are tight-you might want to tie each one to make sure it doesn't happen again. Time to… [cont.]
Answered by bomullock - Sun Feb 18 19:20:08 2007

On a buttoned shirt, it is common for the bottommost button slit to be perpendicular to the others?
Q. I have such a shirt where the last button slit is horizontal, while all others are vertical. I'm wondering if this is the result of poor workmanship.
Asked by shockman - Wed Jun 23 14:02:56 2010 - Fashion & Accessories - 1 Answers - Comments

A. All of my buttoned shirt's button slits are either all horizontal or all vertical. So i think it is the result of poor workmanship.
Answered by cathzz - Wed Jun 23 14:42:22 2010

How to fix a button that is stuck on an ipod?
Q. My ipod touch 4g has a broken button. On the top the button got stuck down and wont pop back up, even by force. Is there a way to loosen it?
Asked by Billy - Mon Oct 17 22:26:31 2011 - Music & Music Players - 2 Answers - Comments

A. Well if prying dosnt work you might have to go extreme, take it to an apple store. If you dont want to/cant, go really extreme and take it a part and press the button out, maybe grease it up.
Answered by Caleb - Mon Oct 17 22:30:04 2011

What color button up shirt would go good with a green tie?
Q. I already have my suit (dark black) picked out, but I don't know what color button up shirt would go better with a green shiny tie. We are having a huge holiday party at our Pain Management Clinic. Hundreds of people will be there.
Asked by wsibo123 - Fri Nov 16 19:44:56 2007 - Fashion & Accessories - 11 Answers - Comments

A. well, it depends on whether you want to dress more youthfully or conservatively (well, as conservative as you can make it with a shiny green tie). if you want to go conservative, i say a shirt in light neutral colors/white, such as a very pale tan, cream, etc. the fabric should be either sateen-ish (sorry, couldn't find a better word x D) striped is good, also. if you want to dress a little more younger, you can wear a salmon color, or maybe even pink, depending on how "young" you want to look. also, go with matte-looking silk.
Answered by Ashley S - Fri Nov 16 20:13:58 2007

How do I create a different like button on Face Book? Such as the dislike button?
Q. I wanted to know how to make my own new type of like button. I have downloaded a dislike button and that's what she said button, but is there a way for me to create my own?
Asked by - Tue Dec 15 16:33:18 2009 - Facebook - 4 Answers - Comments

A. I have no idea but you can e-mail the people that created Facebook with your idea. That might work if they like it.
Answered by Caroline - Tue Dec 15 16:36:48 2009

How do you feel about the belly button piercing on the bottom instead of the top?
Q. Okay. I was just at the piercing place to see if I could get my belly button pierced. Since I have an outtie belly button, the piercing guy said that I could not get it the top of my belly button because the piercing would be too close to the edge. So I was wondering if I should get the bottom of my belly button pierced. I mean, I think it looks good but what do you think?
Asked by me6576 - Wed Jun 20 17:30:11 2007 - Other - Skin & Body - 3 Answers - 2 Comments

A. I think more people are getting these than you realize. Someone else just posted a similiar question. If you think it looks good and are set on getting this piercing than do it. You obviously want it.
Answered by aurora - Wed Jun 20 17:33:50 2007

What button is black converted to on an xbox 360 controller?
Q. When playing an original xbox game of the 360, what button is black converted to on the 360 controller?
Asked by Jonathan - Wed Aug 3 15:51:30 2011 - Video & Online Games - 1 Answers - Comments

How do button up shirts shrink in the dryer?
Q. I have a button up shirt that is 100% cotton and I know that it will shrink in the dryer if I use the regular heat setting. I need some answers from people who have dried their shirts before - do they tend to shrink vertically or horizontally? The shirt fits almost perfectly except it's a little long, so I'm hoping that it shrinks vertically. Any tips/suggestions/advice?
Asked by Chris Mattson - Wed Aug 11 20:20:06 2010 - Cleaning & Laundry - 3 Answers - Comments

A. Shirts usually do not shrink enough to fit any differently at all. They only shrink enough to make the collar turn up a little and to make the shirt lay a little differently. If you want to avoid this, hang the shirts to air dry. And the only way to shrink the length of your shirt is to hem it. If you don't sew, most dry cleaners do alterations, and hemming is a very simple alteration. I doubt it would cost much. -
Answered by Shan - Thu Aug 12 10:56:57 2010

How do I create a button on an Excel spreadsheet that will start & run a macro?
Q. I would like to place a button in an Excel spreadsheet that will run a macro. I already know how to create a macro, and I intend to use the same workbook over & over each month. I also need to know more about storing macro's in the worksheet. This macro will go to a specific directory, open a specific file, manipulate, copy & paste that file into this spreadsheet, update the pivot table and populate other sheets throughout the entire workbook. I would like to place buttons on all the worksheets that contain data, around 12 sheets. These sheets then populate 3 reports that are due the first week of the month.
Asked by Sunny_1_ - Wed Sep 13 17:19:49 2006 - Programming & Design - 2 Answers - Comments

A. From the Forms toolbar select the button tool and place it where you want it on your spreadsheet. Then you can define the properties of that assign a macro to run when you click the button.
Answered by stlouiscurt - Wed Sep 13 19:22:50 2006

What is the best way to create button in flash that changes its colour after being clicked on ?
Q. Suppose I create a button in Scene 1. Say of Blue colour. I click on it to go to Scene 2, while doing so it becomes red. Now when I return back to Scene 1 I want the button to be red and not blue. Basically I want to change the colour of the visited buttons. Like it happens on the Web browser. I'm using Flash CS4.
Asked by FJ - Wed Nov 18 04:38:52 2009 - Programming & Design - 2 Answers - Comments

A. Step 1: Create an Empty Movie Clip Step 2: Create 2 Keyframes inside Empty Movie Clip Step 3: Create blue button on 1st Frame and red button on 2nd frame. Step 4: Now right click on each frame and goto action panel and write stop(); on each frame. Step 5: Now back to the main timeline and drag the Empty Movie Clip from the library which we have made for buttons. Step 5: Now Select the Movie Clip and goto action panel and write this script. var flag = 0; this.on Release = function() { if ( flag == 0 ){ flag = 1; this.goto And Stop(2); } } Note: This is Actionscript version 2.0, This script may not working with version 3.0
Answered by zeex - Wed Nov 18 05:31:15 2009

How does push button start work without the smart key fob?
Q. How does push button start work if you dont have that "Smart Key" Fob? I figured that having a push button is only sensible if you have that fob that senses when you are near the car, but I see some cars with push button start that dont come with the key fob. How would you use the push button then? insert the key...then push the button? how redundant is that?
Asked by CRAzYAPPLE - Tue Jul 15 22:17:21 2008 - BMW - 1 Answers - Comments

A. You put the key fob in it's slot, and then push the button. It may seem redundant, but the button starts a sequence controlled by the computer. With a key, you could hold it and keep running the starter after ignition. With the button, the computer runs the starter only as long as it is needed, it doesn't matter how long you hold the button, the computer takes over. Also, less wear and tear. The fob has no mechanical action and all you are doing is pushing a button, rather than turning an ignition cylinder with contacts.
Answered by M333 - Wed Jul 16 00:06:59 2008

How to prevent accidentally pressing the home button on the i Phone while running a game/program?
Q. Sometimes when I'm playing a game or using an application I accidentally hit the home button which closes the running game/program and it's very frustrating as I might be in the middle of a chess or pool game with another user. Is there anyway to "lock" the home button or to go back to the previous screen with the software after hitting the button?
Asked by tahoma - Fri Jan 9 04:23:04 2009 - Cell Phones & Plans - 2 Answers - Comments

A. Sorry that's not possible. You'll just have to be careful.
Answered by tnie iaietuiai - Fri Jan 9 05:15:38 2009

What button do you press to shift in a drag race on need4speed pro for wii?
Q. I am have trouble doing a drag race in need for speed pro for nintendo wii, What button do I need to press to get to the next gear? 1,2,3,4 ETC. I have tried using the normal arrow up and arrow down keys but nothing happens.
Asked by DJ - Thu Jun 18 17:08:10 2009 - Nintendo Wii - 1 Answers - Comments

A. I don't have that particular game for the wii, but in most racing games it is either B, 1, or 2.
Answered by Bailey(: - Thu Jun 18 17:13:20 2009